[Shop-talk] Socket holders
Chris Kantarjiev
cak at dimebank.com
Thu Jul 5 14:48:35 MDT 2007
> Different manufacturers seem to have different 'favorite' sizes, it's
> rare to find a nut that needs an 11mm socket but my Taurus SHO is lousy
> with the things. The Japanese stuff I've run into seems to have a lot
> of 12mm heads on M8 bolts.
Oh, that's a favorite topic, indeed. The JIS metric standard
is different from the DIN metric standard is different from the
ISO metric standard. Choosing the right wrench/socket is the
easy part. Finding the correct replacement fastener is where
it gets hard. (FYI, Wurth sells a JIS assortment, but it is
truly difficult to find some of the DIN metric nuts, much less nylocs.)
More information about the Shop-talk
mailing list