From smokey at railops.com Tue Apr 23 19:35:08 2019 From: smokey at railops.com (smokey) Date: Tue, 23 Apr 2019 20:35:08 -0500 Subject: [Oletrucks] Leaf spring adjustment Message-ID: My 1950 3600 sits a little low on the front drivers side. I see that there is a bolt-on attachment available to give sagging leaf springs a little boost. Has anyone used this method, and will it work on front leaf springs? Thanks! Smokey Culver League City TX -------------- next part -------------- An HTML attachment was scrubbed... URL: From gale_gorman at me.com Tue Apr 23 20:08:15 2019 From: gale_gorman at me.com (GALE GORMAN) Date: Tue, 23 Apr 2019 21:08:15 -0500 Subject: [Oletrucks] Leaf spring adjustment In-Reply-To: References: Message-ID: <687FCE93-ED15-43E2-A7E0-E8FE3F48F029@me.com> Smokey, I took my front leaf springs to Pruitt on Canal St. and they re-arched them to GM specs. Gale Gorman Houston 1954 3100 1967 C20 On Apr 23, 2019, at 8:35 PM, smokey wrote: My 1950 3600 sits a little low on the front drivers side. I see that there is a bolt-on attachment available to give sagging leaf springs a little boost. Has anyone used this method, and will it work on front leaf springs? Thanks! Smokey Culver League City TX _______________________________________________ Oletrucks at autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/pipermail/oletrucks Unsubscribe/Manage: http://autox.team.net/mailman/options/oletrucks/gale_gorman at mac.com From nsurles at aol.com Wed Apr 24 07:09:11 2019 From: nsurles at aol.com (Sonny) Date: Wed, 24 Apr 2019 09:09:11 -0400 Subject: [Oletrucks] Leaf spring adjustment In-Reply-To: References: Message-ID: Hi Smokey, When I bought one of my trucks it had bolt-on coils on the rear. I figured it was for possible overloads and left them on. They didn?t touch the frame unless it was heavily loaded. I?m not aware of anything else. Have you seen something different? Sonny From: smokey Sent: Tuesday, April 23, 2019 9:35 PM To: oletrucks at autox.team.net Subject: [Oletrucks] Leaf spring adjustment My 1950 3600 sits a little low on the front drivers side.? I see that there is a bolt-on attachment available to give sagging leaf springs a little boost.? Has anyone used this method, and will it work on front leaf springs? Thanks! Smokey Culver League City TX -------------- next part -------------- An HTML attachment was scrubbed... URL: