[Oletrucks] Bed Strips

[Miq Millman]

If you have a table saw, it's fairly easy to get the profile correct.

If you don't then for $235, you could buy a router and bit, and then get
wood locally and make it yourself.

Here is a good one:
http://a.co/iDJI4wA

And now you have another tool in the shop.




--
__
Miq Millman   miq at bigllama.com
Tualatin, OR  Big Llama Productions

On Sun, Jul 2, 2017 at 6:42 PM, Ric McAnulty <ric_mcanulty at yahoo.com> wrote:

> I'm currently building a custom flat bed for my '50 3100 5 window. I
> picked up a bed from a 59 GMC 1 ton om the cheap ,
> and have fabricated it to fit the 50.
> Looking for bed strips, I found one of the vendors that sells un-punched
> bed strips 77 inches long and bolts for a total of about $ 125.
> Problem is they want $ 235 to ship them which seems outrageous.  I'm still
> searching for a vendor that sells the bed strips un-punched.
> I'm wondering if anyone has done something other than the standard bed
> strips and would be wiling to share
>
> Thanks
>
> Ric McAnulty
> '50 5-window Custom Cab
>
> --
> This e-mail messages is for the sole use of the intended recipient(s)
> and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender
> by e-mail and destroy all copies of the original message.
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> Oletrucks at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/oletrucks/miq at bigllama.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/oletrucks/attachments/20170703/8051b56f/attachment.html>