[Oletrucks] Attaching cab to frame

[James E Hays]

Harry: Have the same truck – been so long had to look myself. Rear cab mounting is each side pair of about 2’’ X 2’’ pad with rolled eyelet across one end – mounted to bottom of cab & outside of frame. Bushings are for about 4 ‘’ long arm bolts between installed pads.

Hope this helps – ask more if needed,
Jim    55-1st w / 94 LT 1 / 4L60E / almost ready for paint



From: Harry Spencer 
Sent: Tuesday, May 03, 2016 4:56 PM
To: Oletrucks list 
Subject: [Oletrucks] Attaching cab to frame

Okay, I pulled my 55 1st series 3100 apart about 10 years ago. Today, I finally pushed the cab shell back into position on the chassis for a trip to a welder. Found the two forward mounting holes with no problem. Where the heck does the back of the cab attach to the frame? The cab bolts kit I bought includes the two forward bolts and rubber pads plus four rubber bushings.

 

I’m afraid it is too late, but remind me to take photos of everything I disassemble in the future. The good news is that the engine and tranny will be bolted in tomorrow.

 

Thanks for any help. Harry

 

1955 1st Series Chevy Pickup

 

 

 

 



--------------------------------------------------------------------------------
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/oletrucks/thomasind@nventure.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/oletrucks/attachments/20160504/cc773cd5/attachment.html>