[Oletrucks] Oletrucks Digest, Vol 8, Issue 9

[Kinderlehrer]

You could also try Steele Rubber http://www.steelerubber.com/  Probably
where LC gets their rubber parts.

Bob K.

 

From: Oletrucks [mailto:oletrucks-bounces at autox.team.net] On Behalf Of Chuck
Smith
Sent: Wednesday, April 27, 2016 12:10 PM
To: oletrucks at autox.team.net
Subject: Re: [Oletrucks] Oletrucks Digest, Vol 8, Issue 9

 

Bob, 

Jim Carter, LMC Trucks, and Classic Parts of America sell division bar liner
material as well as liners for the rest of the window and rubber seals for
the vent wing.  I think that I bought the vent wing rivets from Carter many
years ago but don't see them in his catalog now.  However they  and the
rivet setting tool are in the Classic Parts of America catalog. LMC also
sells complete lined division bars but I am too cheap for that.  Removing
the window is a pain in the keister so it might be a good time to renew
everything if you have the $$$$.  

Best regards, 

Chuck

> From: oletrucks-request at autox.team.net
> Subject: Oletrucks Digest, Vol 8, Issue 9
> To: oletrucks at autox.team.net
> Date: Tue, 26 Apr 2016 12:00:02 -0600
> 
> Send Oletrucks mailing list submissions to
> oletrucks at autox.team.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://autox.team.net/mailman/listinfo/oletrucks
> or, via email, send a message with subject or body 'help' to
> oletrucks-request at autox.team.net
> 
> You can reach the person managing the list at
> oletrucks-owner at autox.team.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Oletrucks digest..."
> 
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/oletrucks/
> 
> Today's Topics:
> 
> 1. Re: DIVISION BAR LINER GLUE? (rswanson)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 25 Apr 2016 17:49:45 -0700
> From: rswanson <mapa-kettle at shaw.ca>
> To: oletrucks at autox.team.net
> Subject: Re: [Oletrucks] DIVISION BAR LINER GLUE?
> Message-ID: <571EBB29.1010406 at shaw.ca>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
> 
> Chuck,
> I have a 55 Cameo 1/2 ton and I need to do the same job, If anyone
> knows of a good place to buy the material, I would appreciate it if you
> could pass on this information as well.
> Bob
> 
> 
> 
> On 2016-04-25 05:52 AM, Chuck Smith wrote:
> > About 20 years ago I replaced the Vertical Division Bar Channel Felt 
> > Liners in my 57 3100. The felt liner strip is glued into the U shaped 
> > channel that cushions the front of the sliding door window. I spread 
> > the glue on the inside of the division bar and pressed the liner into 
> > the U shaped recess with a piece of plywood - the process went well 
> > but they have finally worn out.
> >
> > So it is time to do it again but I've forgotten (old age is cruel) 
> > what glue I used. I think that I remember applying it with a brush 
> > attached to the bottle cap - it may have been rubber cement.
> >
> > Can anyone report on their experiences with this repair and what glue 
> > they used?
> >
> > Best regards,
> >
> > Chuck
> >
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://autox.team.net/pipermail/oletrucks/attachments/20160425/293a4be9/att
achment-0001.html>
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> Oletrucks mailing list
> Oletrucks at autox.team.net
> http://autox.team.net/mailman/listinfo/oletrucks
> 
> 
> ------------------------------
> 
> End of Oletrucks Digest, Vol 8, Issue 9
> ***************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/oletrucks/attachments/20160428/9855ea76/attachment.html>