[Oletrucks] (no subject)

[John Niolon]

here's what I did on my 53 f-100 George... might give you an idea or two

http://jniolon.classicpickup.com/parkingbrake/parkingbrakeinstall.html

john

----- Original Message ----- 
From: "George Perez" <gperez670 at verizon.net>
To: <oletrucks at autox.team.net>
Sent: Friday, July 25, 2014 3:52 PM
Subject: [Oletrucks] (no subject)


> Hi All,
>
>
>
> It has been a while since I posted on the site; I have been doing a frame
> off restoration on my 1955 2nd series Chevy step side short bed and I 'am
> almost finished with the chassis.
>
>
>
> The emergency brake rigging is where I have run into a problem.  So I am
> hoping some of you can give me some ideas on what you did about the
> emergency brake linkage. I have a CPP brake booster mounted in the frame 
> and
> a ididit steering column and I have also installed a Camaro rear end with
> CPP rear leaf kit.
>
>
>
> I think I have the rear part of the linkage some what figured out, but 
> going
> into the cab from the booster is still a problem.
>
> I would like to use a foot pedal assembly instead of the OE brake handle 
> if
> I can. Has any one done this successfully?
>
>
>
> I would love to hear what any of you all might have done to solve this
> problem; any help would be greatly appreciated.
>
>
>
> Thanks
>
> George
>
> 1955 2nd  Chevy Stepside
> _______________________________________________
>
> Oletrucks at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/oletrucks/jniolon@att.net 


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com