[Oletrucks] 54 Chev P U One piece Side Window Felt

[Thomas, Robert E.]

Jim:
            You are correct about the door felt.  However, the other felts
with the chrome bead belong to the channel formed by the wing-vent, by my
recollection. [i.e., the front of the window where it joins the wing-vent
assembly)  I've got to go to the property where my 54 GMC deluxe is stored
tomorrow, & I'll look to confirm.

So, don't get wild with the tin snips yet!

RT


-----Original Message-----
From: oletrucks-bounces at autox.team.net on behalf of James Hays
Sent: Sat 3/3/2012 3:52 PM
To: oletrucks at autox.team.net
Subject: [Oletrucks] 54 Chev P U One piece Side Window Felt

Hello - anybody left out there.



Loaned my Assembly Book out - called - not home.



Have two 8' flexible U channels assuming for around outside of window / door
match glued to door with support from inside window trim.



Question: Have 4 - 4' metal backed felts assuming they are to be cut to
length / glued to each side of the door opening at the bottom of the window.



Are there any other pieces to be concerned with?



Thanks,

Jim

55 - 1st P U
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/rthomas@buttecounty.net