[Oletrucks] Fuel Gauge Fix

Mac Kinghorn kinghorn at watersidewireless.net
Mon Aug 8 08:57:19 MDT 2011


Hello Group

In dealing with fuel systems on my newest project I found out that GM uses
gas gauges set up to operate on a sending unit that is 30 ohm resistance.
If you use an aftermarket system it is more than likely using a sending unit
that has a higher ohm rating.  This will result in your gauge reading wrong.
I would suggest that this is more than likely your problem at this time.

Mac Kinghorn
52 Chevy 1300
61 Chevy C10 SBFS

-----Original Message-----
From: oletrucks-bounces at autox.team.net
[mailto:oletrucks-bounces at autox.team.net]On Behalf Of James Hays
Sent: August 6, 2011 6:17 PM
To: oletrucks at autox.team.net
Subject: [Oletrucks] Fuel Gauge Fix


Don't think my AD ( after market sending & gauge) or boat fuel gauges are
reading correct - anyone have a check list on confirming operation ?



Thanks,

Jim

1954 - 5 window
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/kinghorn@watersidewireless.n
et


More information about the Oletrucks mailing list