[Oletrucks] 6 hole wheels with clips for the hubcaps

[Gale Gorman]

Thanks!

Lost a right front wheel bearing on my '54 3100 last week and chose to replace with roller bearings. While it was apart I turned drums and put in new shoes and then took the rest of the steering apart. My tie rod had about a 4 inch sag. I straightened like new. Removing 56 years of dried dirt and grease took longer than all the rest of the work but now my drag link, tie rod, and pivot arms look like new with black paint. Unbelievable how much better it steers.

-- 
Gale Gorman
Houston




On Mar 30, 2010, at 11:37 AM, Smokey Culver wrote:

TF- Task Force  starting at 55 2nd 
AD- Advance Design 47 thru 55 1st

Smokey

-----Original Message-----
From: oletrucks-bounces at autox.team.net
[mailto:oletrucks-bounces at autox.team.net] On Behalf Of Gale Gorman
Sent: Tuesday, March 30, 2010 10:51 AM
To: Devin Ranger
Cc: oletrucks at autox.team.net
Subject: Re: [Oletrucks] 6 hole wheels with clips for the hubcaps

What is TF and AD?

-- 
Gale Gorman
Houston




On Mar 30, 2010, at 10:11 AM, Devin Ranger wrote:

In general, 1/2 ton TF trucks had three clips.  This carried over into the
next generation.  Half ton AD trucks had six clips.

TF eight lug wheels generally had four clips.

Drew
http://www.clunkerfarm.com
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/gale_gorman@mac.com
_______________________________________________

Oletrucks at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/smokey@railops.com