[Nobbc] The TR-6 Toyota trans Conversion

[gonzosaurs at comcast.net]

Hi, 
If you would like to see a finished TR6 with the toyota transmission. you can come over and check mine out. Hell you can buy it if you wish. Two cars and little space. 

dan, 
tr-250 
tr6 
vwbus 
----- Original Message ----- 
From: "Dean Paige" <DPaige at srcity.org> 
To: "North Bay British Car Club" <nobbc at autox.team.net> 
Sent: Monday, May 17, 2010 11:02:24 AM GMT -08:00 US/Canada Pacific 
Subject: [Nobbc] The TR-6 Toyota trans Conversion 

Thank all who offered services and grunt work in the installation of the 
Toyota trans. On Friday last I finally found a way to get it in fairly easily. 
Went and bought a few 5/16" x 4" bolts, cut the heads off and screwed the 
bolts into the top mounting holes. With that done with little adjustment I was 
able to hang the trans on those bolts and it slid right into place. What a 
relief. 

I bolted it in with a safe minimum of the required bolts so that before I 
closed everything up I could make sure that everything was functional. 
Hydraulics working OK etc. Took a look at the starter and noted that the 
pinion assembly was buggered. It's off in the repair shop and should be done 
mid week. 

Meanwhile I'll put fresh Hydro fluid in the brake and clutch cylinders, adjust 
the rear brakes and do some detailing. 

Getting close I think. 

Thanks again for your offers of assistance. 

Deano 
_______________________________________________ 
Nobbc mailing list 
Nobbc at autox.team.net 
http://autox.team.net/mailman/listinfo/nobbc