[Nobbc] MGA grille piping

[Mark Darley]

Andy,
Got it done with the thin piping out. A bit fiddly but due to the  
application of a bit of silicon here and there, it is on.  The thin  
side out minimized the visual impact.
Now to complete the shocks and suspension before Sunday!
Mark

Mark Darley
markdarley at mac.com
Mobile Phone 415 310 5252



On May 13, 2010, at 6:11 PM, andy preston wrote:

> Mark, I'd think that the fat side faces out, but I don't remember  
> there
> being a fat or thin side.  It's very difficult to get to the piping  
> to stay
> in place on the back of the grille prior to installing the grille  
> on the
> car.  On mine I attached the piping to the back of the grille and  
> held it in
> place with blue masking tape spaced 1" apart.  I used clear  
> silicone sealer
> to attach the piping to the back of the grille in the 1" spaces.   
> When the
> silicone had set, I removed the tape and applied more silicone  
> sealant where
> the tape had been.   Even then you have to be very careful to  
> ensure that it
> doesn't fall off.
>
>
>
> Good luck
>
>
>
> Andy
> _______________________________________________
> Nobbc mailing list
> Nobbc at autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc