[Nobbc] anyone going to the Marin concourse this Sunday?

Thu May 13 20:34:55 MDT 2010

I will be there but possibly not in the MGA due to the fact that my  
front end is under reconstruction.  Time will tell!
Mark

Mark Darley
markdarley at mac.com
Mobile Phone 415 310 5252

On May 13, 2010, at 6:23 PM, Alan and Paula Spencer wrote:

> Andy's right.  You won't want to miss this show!
>
> Gates open at 9:00.  See
> you there!
>
> Alan
>
>
>
> ________________________________
> From: andy preston
> <andypreston at sbcglobal.net>
> To: North Bay British Car Club
> <nobbc at autox.team.net>
> Sent: Thu, May 13, 2010 5:55:50 PM
> Subject: Re: [Nobbc]
> anyone going to the Marin concourse this Sunday?
>
> My little red MGA Coupe was
> accepted as an entry so I'll see anyone who's
> going there.  I'm in Class I1
> for import cars built between 1945 and 1975
> and costing less than $5,000 when
> new.
> I think it's going to be a terrific show and remember that all the  
> money
> goes to charity.
>
> Andy
>
>
>
> -----Original Message-----
> From:
> nobbc-bounces at autox.team.net [mailto:nobbc-bounces at autox.team.net] On
> Behalf
> Of liam oflaherty
> Sent: Thursday, May 13, 2010 3:36 PM
> To: North Bay British
> Car Club
> Subject: [Nobbc] anyone going to the Marin concourse this Sunday?
> Should be good marin fun in the sun.
> Liam
> 57 mga
> ----- Original Message -----
> From: "Paige, Dean" <DPaige at srcity.org>
> To: "'North Bay British Car Club'"
> <nobbc at autox.team.net>
> Sent: Thursday, May 13, 2010 2:39 PM
> Subject: Re:
> [Nobbc] Speaking of hydraulics.
>
>
>> Thanks for the offer Mike. I have an idea
> that may get the tranny in. I'm
>> going to give it a try tonight. The trans is
> in place but about  "1-1/2
>> from
>> mating surfaces, a bit more on the bottom
> side. Going to remove a rear
>> trans
>> mounting plate from the trans. Lowers
> the rear of the assembly. If I get
>> it in
>> (getting splines aligned the
> trick) I'm home free. Just need the right
>> angle.
>> Once bolted up I can
> jack up the rear of the trans and put the plate back
>> in
>> place and from
> there I'm good. If it doesn't work you will hear from me.
>>
>> Also got the kit
> for the nutserts. Should work fine.
>>
>> Deano
>>
>> -----Original Message-----
>>
> From: nobbc-bounces at autox.team.net [mailto:nobbc- 
> bounces at autox.team.net]
>> On
>> Behalf Of mikestagnaro at comcast.net
>> Sent: Thursday, May 13, 2010 11:37 AM
>>
> To: North Bay British Car Club
>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>
>> Deano,
>> If you need any physical help getting the tranny in place I'm
> available.
>> Mike
>> 57 MGA
>>
>> ----- Original Message -----
>> From: Robin
> Jackson
>> To: North Bay British Car Club
>> Sent: Thu, 13 May 2010 17:53:08
> +0000 (UTC)
>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>
>> I have a tran
> jack that I have used mostly on trucks, but if you want to
>> borrow it you are
> welcome. Give me a call 526-5535
>>
>> Rob
>>
>> On Thu, May 13, 2010 at 10:18 AM,
> Paige, Dean wrote:
>>
>>> Mitch,
>>>
>>> Thanks. I'm at the stage having the
> Toyota tranny sitting in the car.
>>> Having a
>>> hell of a time trying to get
> it lined up with the engine. I am not as
>>> adept at this as I was as a
> younger man. Oh my aching back! Got close
>>> last night but I think I am going
> to have to rent a tranny jack. But I
>>> digress I'm going to pick up the
> netserts today. Was going to get it
>>> from the local Reliable but if HF has
> the nutserts and a tool I will
>>> likely get them there. I'll be heading over
> there later this afternoon
>>> and will let you know ASAP.
>>> Thanks for the
> offer.
>>>
>>> Deano
>>>
>>> -----Original Message-----
>>> From:
> nobbc-bounces at autox.team.net
>>> [mailto:nobbc-bounces at autox.team.net]
>>> On
>>>
> Behalf Of Mitch Utsey
>>> Sent: Thursday, May 13, 2010 9:46 AM
>>> To: North Bay
> British Car Club
>>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>>
>>> I have
> one, but it is buried in my garage. If I can find it, you are
>>> welcome to
> it. How quickly do you need it?
>>>
>>> Harbor Freight used to sell one that
> would work with Rivnuts and
>>> Nutserts.
>>>
>>> -Mitch
>>>
>>> On Thu, May 13,
> 2010 at 9:33 AM, Paige, Dean wrote:
>>>
>>>> OK, I found a source for nutserts.
> However the tool for said
>>>> nutserts is $56.
>>>> Any NOBBC'r have one I
> could borrow for a couple of days?
>>>>
>>>> Deano
>>>>
>>>> -----Original
> Message-----
>>>> From: nobbc-bounces at autox.team.net
>>>>
> [mailto:nobbc-bounces at autox.team.net]
>>>> On
>>>> Behalf Of Scott Irwin
>>>>
> Sent: Wednesday, May 12, 2010 5:37 PM
>>>> To: North Bay British Car Club
>>>>
> Subject: Re: [Nobbc] Speaking of hydraulics.
>>>>
>>>> They are called
> nutserts where I'm from.
>>>>
>>>> Scott
>>>>
>>>>
> --------------------------------------------------
>>>> From: "Bill Crowe"
>>>
>> Sent: Wednesday, May 12, 2010 3:46 PM
>>>> To: "North Bay British Car Club"
>>>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>>>
>>>>> maybe
> Rivnuts???  Aircraft Spruce carries them...
>>>>>
>>>>> Bill
>>>>>
>>>>>
> --- On Wed, 5/12/10, sirplb at aol.com wrote:
>>>>>
>>>>> From: sirplb at aol.com
>>>>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>>>> To:
> nobbc at autox.team.net
>>>>> Date: Wednesday, May 12, 2010, 3:25 PM
>>>>>
>>>>
>> Hi Deano,
>>>>>
>>>>> Some years ago (25-30) there were these nuts that
> could be
>>>>> installed with a pop-rivet type of gun in thin metal. If I
>>>
>>> remember correctly, they needed a hole just a little larger than
>>>>>
> the actual nut. (of course the brand name escapes me) Seemed to work
>> fine at
> the time?!?
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Pat
>>>>>
>>>>> 74 JH 14858
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>
>>> From: Paige, Dean
>>>>> To: 'North Bay British Car Club'
>>>>> Sent:
> Fri, May 7, 2010 9:54 am
>>>>> Subject: [Nobbc] Speaking of hydraulics.
>>>>
>>
>>>>>
>>>>> It looks like I may well get the Herman van den Akker Toyota 5
>>>>> speed tranny onversion into the TR-6 this weekend. This after
>>>>>
> having to ship the tranny ack to southern Cal after UPS dropped
>>>>> the
> damn thing. In the mean time I leaned up the interior, put a
>>>>> new coat
> of paint on the floor pan etc etc.
>>>>> Have one small but big issue. The
> captive nut on the floor pan on
>>>>> the right ront of the drivers side seat
> gave up the ghost. The
>>>>> placement couldn't be orse. The hole in the
> floor pan is directly
>>>>> above the frame member there.
>>>>> How
>>>>> n
> the hell  does one deal with this. Barely enough room to get
>>>>> even a
> screw river in the space. I thought of looking for
>>>>> something similar to
> metal xpanding molly fasteners used in
>>>>> hanging heavy objects on
> drywall. Haven't ooked yet to see if
>>>>> there is one available that will
> stand up to the stresses n the
>>>>> seat. Any advice is
>>> welcome.
>>>>>
> Deano
>>>>> ______________________________________________
>>>>> obbc
> mailing list
>>>>> obbc at autox.team.net
>>>>>
> ttp://autox.team.net/mailman/listinfo/nobbc
>>>>>
> _______________________________________________
>>>>> Nobbc mailing list
>>>>
>> Nobbc at autox.team.net
>>>>> http://autox.team.net/mailman/listinfo/nobbc
>>>
>>> _______________________________________________
>>>>> Nobbc mailing list
>>>>> Nobbc at autox.team.net
>>>>>
> http://autox.team.net/mailman/listinfo/nobbc
>>>>
>>>>
>>>>
>>>>>
>>>>> No
> virus found in this incoming message.
>>>>> Checked by AVG - www.avg.com
>>>>
>> Version: 9.0.819 / Virus Database: 271.1.1/2870 - Release Date:
>>>>>
> 05/12/10 11:26:00
>>>> _______________________________________________
>>>>
> Nobbc mailing list
>>>> Nobbc at autox.team.net
>>>>
> http://autox.team.net/mailman/listinfo/nobbc
>>>>
> _______________________________________________
>>>> Nobbc mailing list
>>>>
> Nobbc at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/nobbc
>>>
> _______________________________________________
>>> Nobbc mailing list
>>>
> Nobbc at autox.team.net
>>> http://autox.team.net/mailman/listinfo/nobbc
>>>
> _______________________________________________
>>> Nobbc mailing list
>>>
> Nobbc at autox.team.net
>>> http://autox.team.net/mailman/listinfo/nobbc
>>
> _______________________________________________
>> Nobbc mailing list
>>
> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
>>
> _______________________________________________
>> Nobbc mailing list
>>
> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
>>
> _______________________________________________
>> Nobbc mailing list
>>
> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
> _______________________________________________
> Nobbc mailing list
> Nobbc at autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc
> _______________________________________________
> Nobbc mailing list
> Nobbc at autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc
> _______________________________________________
> Nobbc mailing list
> Nobbc at autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc