[Nobbc] anyone going to the Marin concourse this Sunday?

Thu May 13 16:58:19 MDT 2010

I'll be there helping a friend pouring wine for The Adobe Rd. 
Winery..stop on by!
Bill Shoemaker
'90 & '92 Jag XJ6's

liam oflaherty wrote:
> Should be good marin fun in the sun.
> Liam
> 57 mga
> ----- Original Message ----- From: "Paige, Dean" <DPaige at srcity.org>
> To: "'North Bay British Car Club'" <nobbc at autox.team.net>
> Sent: Thursday, May 13, 2010 2:39 PM
> Subject: Re: [Nobbc] Speaking of hydraulics.
>
>
>> Thanks for the offer Mike. I have an idea that may get the tranny in. 
>> I'm
>> going to give it a try tonight. The trans is in place but about  
>> "1-1/2 from
>> mating surfaces, a bit more on the bottom side. Going to remove a 
>> rear trans
>> mounting plate from the trans. Lowers the rear of the assembly. If I 
>> get it in
>> (getting splines aligned the trick) I'm home free. Just need the 
>> right angle.
>> Once bolted up I can jack up the rear of the trans and put the plate 
>> back in
>> place and from there I'm good. If it doesn't work you will hear from me.
>>
>> Also got the kit for the nutserts. Should work fine.
>>
>> Deano
>>
>> -----Original Message-----
>> From: nobbc-bounces at autox.team.net 
>> [mailto:nobbc-bounces at autox.team.net] On
>> Behalf Of mikestagnaro at comcast.net
>> Sent: Thursday, May 13, 2010 11:37 AM
>> To: North Bay British Car Club
>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>
>> Deano,
>> If you need any physical help getting the tranny in place I'm available.
>> Mike
>> 57 MGA
>>
>> ----- Original Message -----
>> From: Robin Jackson
>> To: North Bay British Car Club
>> Sent: Thu, 13 May 2010 17:53:08 +0000 (UTC)
>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>
>> I have a tran jack that I have used mostly on trucks, but if you want to
>> borrow it you are welcome. Give me a call 526-5535
>>
>> Rob
>>
>> On Thu, May 13, 2010 at 10:18 AM, Paige, Dean wrote:
>>
>>> Mitch,
>>>
>>> Thanks. I'm at the stage having the Toyota tranny sitting in the car.
>>> Having a
>>> hell of a time trying to get it lined up with the engine. I am not as
>>> adept at this as I was as a younger man. Oh my aching back! Got close
>>> last night but I think I am going to have to rent a tranny jack. But I
>>> digress I'm going to pick up the netserts today. Was going to get it
>>> from the local Reliable but if HF has the nutserts and a tool I will
>>> likely get them there. I'll be heading over there later this afternoon
>>> and will let you know ASAP.
>>> Thanks for the offer.
>>>
>>> Deano
>>>
>>> -----Original Message-----
>>> From: nobbc-bounces at autox.team.net
>>> [mailto:nobbc-bounces at autox.team.net]
>>> On
>>> Behalf Of Mitch Utsey
>>> Sent: Thursday, May 13, 2010 9:46 AM
>>> To: North Bay British Car Club
>>> Subject: Re: [Nobbc] Speaking of hydraulics.
>>>
>>> I have one, but it is buried in my garage. If I can find it, you are
>>> welcome to it. How quickly do you need it?
>>>
>>> Harbor Freight used to sell one that would work with Rivnuts and 
>>> Nutserts.
>>>
>>> -Mitch
>>>
>>> On Thu, May 13, 2010 at 9:33 AM, Paige, Dean wrote:
>>>
>>> > OK, I found a source for nutserts. However the tool for said
>>> > nutserts is $56.
>>> > Any NOBBC'r have one I could borrow for a couple of days?
>>> >
>>> > Deano
>>> >
>>> > -----Original Message-----
>>> > From: nobbc-bounces at autox.team.net
>>> > [mailto:nobbc-bounces at autox.team.net]
>>> > On
>>> > Behalf Of Scott Irwin
>>> > Sent: Wednesday, May 12, 2010 5:37 PM
>>> > To: North Bay British Car Club
>>> > Subject: Re: [Nobbc] Speaking of hydraulics.
>>> >
>>> > They are called nutserts where I'm from.
>>> >
>>> > Scott
>>> >
>>> > --------------------------------------------------
>>> > From: "Bill Crowe"
>>> > Sent: Wednesday, May 12, 2010 3:46 PM
>>> > To: "North Bay British Car Club"
>>> > Subject: Re: [Nobbc] Speaking of hydraulics.
>>> >
>>> > > maybe Rivnuts???   Aircraft Spruce carries them...
>>> > >
>>> > > Bill
>>> > >
>>> > > --- On Wed, 5/12/10, sirplb at aol.com wrote:
>>> > >
>>> > > From: sirplb at aol.com
>>> > > Subject: Re: [Nobbc] Speaking of hydraulics.
>>> > > To: nobbc at autox.team.net
>>> > > Date: Wednesday, May 12, 2010, 3:25 PM
>>> > >
>>> > > Hi Deano,
>>> > >
>>> > > Some years ago (25-30) there were these nuts that could be
>>> > > installed with a pop-rivet type of gun in thin metal. If I
>>> > > remember correctly, they needed a hole just a little larger than
>>> > > the actual nut. (of course the brand name escapes me) Seemed to 
>>> work
>> fine at the time?!?
>>> > >
>>> > > Cheers,
>>> > >
>>> > > Pat
>>> > >
>>> > > 74 JH 14858
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >
>>> > >
>>> > > -----Original Message-----
>>> > > From: Paige, Dean
>>> > > To: 'North Bay British Car Club'
>>> > > Sent: Fri, May 7, 2010 9:54 am
>>> > > Subject: [Nobbc] Speaking of hydraulics.
>>> > >
>>> > >
>>> > > It looks like I may well get the Herman van den Akker Toyota 5
>>> > > speed tranny onversion into the TR-6 this weekend. This after
>>> > > having to ship the tranny ack to southern Cal after UPS dropped
>>> > > the damn thing. In the mean time I leaned up the interior, put a
>>> > > new coat of paint on the floor pan etc etc.
>>> > > Have one small but big issue. The captive nut on the floor pan on
>>> > > the right ront of the drivers side seat gave up the ghost. The
>>> > > placement couldn't be orse. The hole in the floor pan is directly
>>> > > above the frame member there.
>>> > > How
>>> > > n the hell  does one deal with this. Barely enough room to get
>>> > > even a screw river in the space. I thought of looking for
>>> > > something similar to metal xpanding molly fasteners used in
>>> > > hanging heavy objects on drywall. Haven't ooked yet to see if
>>> > > there is one available that will stand up to the stresses n the
>>> > > seat. Any advice is
>>> welcome.
>>> > > Deano
>>> > > ______________________________________________
>>> > > obbc mailing list
>>> > > obbc at autox.team.net
>>> > > ttp://autox.team.net/mailman/listinfo/nobbc
>>> > > _______________________________________________
>>> > > Nobbc mailing list
>>> > > Nobbc at autox.team.net
>>> > > http://autox.team.net/mailman/listinfo/nobbc
>>> > > _______________________________________________
>>> > > Nobbc mailing list
>>> > > Nobbc at autox.team.net
>>> > > http://autox.team.net/mailman/listinfo/nobbc
>>> >
>>> >
>>> >
>>> > >
>>> > > No virus found in this incoming message.
>>> > > Checked by AVG - www.avg.com
>>> > > Version: 9.0.819 / Virus Database: 271.1.1/2870 - Release Date:
>>> > > 05/12/10 11:26:00
>>> > _______________________________________________
>>> > Nobbc mailing list
>>> > Nobbc at autox.team.net
>>> > http://autox.team.net/mailman/listinfo/nobbc
>>> > _______________________________________________
>>> > Nobbc mailing list
>>> > Nobbc at autox.team.net
>>> > http://autox.team.net/mailman/listinfo/nobbc
>>> _______________________________________________
>>> Nobbc mailing list
>>> Nobbc at autox.team.net
>>> http://autox.team.net/mailman/listinfo/nobbc
>>> _______________________________________________
>>> Nobbc mailing list
>>> Nobbc at autox.team.net
>>> http://autox.team.net/mailman/listinfo/nobbc
>> _______________________________________________
>> Nobbc mailing list
>> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
>> _______________________________________________
>> Nobbc mailing list
>> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
>> _______________________________________________
>> Nobbc mailing list
>> Nobbc at autox.team.net
>> http://autox.team.net/mailman/listinfo/nobbc
> _______________________________________________
> Nobbc mailing list
> Nobbc at autox.team.net
> http://autox.team.net/mailman/listinfo/nobbc