[Morris] Throwout bearings redux

[Gerard]

Not sure there are any active members on the autoX Morris list anymore.

See my web page.

http://gerardsgarage.com/Garage/Tech/TO_Bearings/tobearings.htm

Gerard

On Feb 29, 2012, at 5:37 AM, Kevin Wayne Williams wrote:

> Well, my new, roll-pin free 1275 throwout bearing arrived, and it's  
> at least a 1/4" taller than my other 1275 throwout bearings.  
> Obviously, one or more of these bearings is not a 1275 throwout  
> bearing.
>
> Does anyone know the exact measurement points to distinguish 1098  
> from 1275 bearings? I know 1275s are taller, but for all I know this  
> bearing is from a Yugo or something, so I don't want to just blindly  
> install the tallest of the set.
>
> KWW
> _______________________________________________
>
> Morris at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/morris/pixelsmith@gerardsgarage.com