From kww at kwwilliams.com  Wed Feb 29 06:37:34 2012
From: kww at kwwilliams.com (Kevin Wayne Williams)
Date: Wed, 29 Feb 2012 08:37:34 -0500
Subject: [Morris] Throwout bearings redux
Message-ID: <4F4E2A1E.2070602@kwwilliams.com>

Well, my new, roll-pin free 1275 throwout bearing arrived, and it's at 
least a 1/4" taller than my other 1275 throwout bearings. Obviously, one 
or more of these bearings is not a 1275 throwout bearing.

Does anyone know the exact measurement points to distinguish 1098 from 
1275 bearings? I know 1275s are taller, but for all I know this bearing 
is from a Yugo or something, so I don't want to just blindly install the 
tallest of the set.

KWW

From spook01 at comcast.net  Wed Feb 29 09:53:48 2012
From: spook01 at comcast.net (=?utf-8?B?c3Bvb2swMUBjb21jYXN0Lm5ldA==?=)
Date: Wed, 29 Feb 2012 10:53:48 -0600
Subject: [Morris] =?utf-8?q?Sway_bars?=
Message-ID: <mailman.0.1330534436.30036.morris@autox.team.net>

Anyone have a line on a front sway bar (anti roll bar) for the morris??

Sent from my Verizon Wireless Phone

----- Reply message -----

To: <morris at autox.team.net>
Subject: [Morris] Throwout bearings redux
_______________________________________________

Morris at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/morris/spook01 at comcast.net

From pixelsmith at gerardsgarage.com  Wed Feb 29 23:36:33 2012
From: pixelsmith at gerardsgarage.com (Gerard)
Date: Wed, 29 Feb 2012 22:36:33 -0800
Subject: [Morris] Throwout bearings redux
In-Reply-To: <4F4E2A1E.2070602@kwwilliams.com>
References: <4F4E2A1E.2070602@kwwilliams.com>
Message-ID: <64580398-A28B-4C32-A840-B706CE14BADF@gerardsgarage.com>

Not sure there are any active members on the autoX Morris list anymore.

See my web page.

http://gerardsgarage.com/Garage/Tech/TO_Bearings/tobearings.htm

Gerard

On Feb 29, 2012, at 5:37 AM, Kevin Wayne Williams wrote:

> Well, my new, roll-pin free 1275 throwout bearing arrived, and it's  
> at least a 1/4" taller than my other 1275 throwout bearings.  
> Obviously, one or more of these bearings is not a 1275 throwout  
> bearing.
>
> Does anyone know the exact measurement points to distinguish 1098  
> from 1275 bearings? I know 1275s are taller, but for all I know this  
> bearing is from a Yugo or something, so I don't want to just blindly  
> install the tallest of the set.
>
> KWW
> _______________________________________________
>
> Morris at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/morris/pixelsmith at gerardsgarage.com