[Mini] Thread size

[G von Hoegen]

Hi John, I think it is M12x1.5 
Cheers,
Dr. Gernot Vonhoegen
 
BelvenServices 
Senior Translator   Scientific / Technical
 
Schulstr. 12
17373 Ueckermünde
Germany
 
Tel: 004939771816977 

    On Sunday, 5 January 2020, 03:13:19 CET, John Lieberman <jlieberman37 at comcast.net> wrote:  
 
 Do any of you happen to know the thread pattern for the water 
temperature sending unit that screws into the head on an A+ 1275?

I bought some Bosch electrical gauges -- water temperature and oil 
pressure -- for my '81.  But, when I unscrewed the old Smith's water 
temperature sending unit and tried all of the adapters that came with 
the Bosch gauge, none of them matched the thread pattern.  So I'm 
thinking it must be metric.  Since I'm a Yank, I know a lot about SAE 
threads but I don't know much about metric threads.  I'm thinking it 
might be M16-1.5, but that's just a guess.  Can anybody shed any light 
on this subject?

Thanks a bunch

John

_______________________________________________
Mini-list at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/mini-list/belvenfish@yahoo.co.uk

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mini-list/attachments/20200105/1bcb7683/attachment.htm>