From john.bullas at gmail.com  Mon Jun  7 04:31:02 2010
From: john.bullas at gmail.com (Dr John C Bullas)
Date: Mon, 7 Jun 2010 11:31:02 +0100
Subject: [Mini] Fwd: Fw: Vandervell Email Alert
In-Reply-To: <OF93E12564.771EBBC8-ON8025773B.00291E66-8025773B.002F5FF5@mahle.com>
References: <OF93E12564.771EBBC8-ON8025773B.00291E66-8025773B.002F5FF5@mahle.com>
Message-ID: <AANLkTinLdiGAwW1Kq8l_BF_wAvX8Z8qQp0HwsDwYWVxc@mail.gmail.com>

For information... Vandervell is not dead!!!

---------- Forwarded message ----------
From: allen.graham at gb.mahle.com
Date: Mon, 7 Jun 2010 09:34:04 +0100
Subject: Fw: Vandervell Email Alert
To: john.bullas at gmail.com
Cc: paul.grosvenor at gb.mahle.com

Hello John,

Yes, we do still make the heavy duty Vandervell bearings, but they are now
branded differently. When MAHLE bought us a few years ago they insisted
that everything must be branded as MAHLE so we had to drop the Vandervell
name. I was concerned that we would be lost within the MAHLE organisation
which is why we discreetly set up the Vandervell website "on the side". I
don't think MAHLE know about it yet.

Anyway, we have just started reproducing the mini bearings for the 998cc
and 1275cc engines and they are made here in the UK. We now laser mark the
ID on the bearing back rather than stamp it as the stamping tends to
impair the transfer of heat from the bearing to the housing. This is
something we have taken from our race bearing experience and we decided to
offer it as an extra benefit over anyone else trying to make Mini
bearings. Other than the laser marking the bearings will be just the same,
if not better, than the original Vandervell sets. The new parts have a
cast lead-bronze substrate and a lead-indium overlay and the part numbers
are as follows:

1275cc
Big end bearings: Set number VC1003, individual part number VP8004.
Main bearings: Set number VM1004, individual part number VP8005.
Main bearing with plain lower half: Set number VM1005, individual part
numbers VP8005 and VP8006.

998cc
Big end bearings: Set number VC1017, individual part number VP8019.
Main bearings: Set number VM1018, individual part number VP8020.

They are supplied in a MAHLE Motorsport box as shown on our website but
they still have the VP logo laser marked on the back. We have already
supplied the 1275cc sets into our aftermarket and the 998cc bearings are
being manufactured right now.

Let me know if you need some and I will find out where you can buy them.

Kind Regards

Allen Graham
MAHLE Engine Systems UK Ltd.
Applications Engineer / Account Manager (Race Unit)

4 Inchmuir Road, Whitehill Industrial Estate, Bathgate EH48 2EP West
Lothian, Great Britain
allen.graham at gb.mahle.com, http://www.mahle.com

----- Forwarded by Allen Graham/GB/MAHLE on 07/06/2010 08:29 -----



From: "info at vandervell.co.uk" <info at vandervell.co.uk>
Date: Sat, 05 Jun 2010 23:18:03 +0100
To: <info at vandervell.co.uk>
Subject: Vandervell Email Alert


Fullname
Dr J C Bullas
Email Address
john.bullas at gmail.com
Telephone
07946 317 467
Message
Do you still supply the "tougher Vandervell bearings" I was advised to buy
(and bought) 8 years ago (and still going strong) when I built my 105bhp
(@ fly) 1330 A Series lump??? Kind Regards DR B Webmaster
http://www.ime.org.uk/

-- 
Sent from my mobile device

===========================
http://uk.linkedin.com/in/drjohnbullas

From millerls at ado13.com  Tue Jun 29 23:31:12 2010
From: millerls at ado13.com (Larry & Sandi Miller)
Date: Tue, 29 Jun 2010 22:31:12 -0700
Subject: [Mini] Parts Manual
Message-ID: <DC018029-E70D-4960-8134-5B7D35B02BDF@ado13.com>

I have a 1966 Cooper S and am in need of a parts manual. The only one I can
find at the moment is for sale at $90 usd on eBay. It would be nice to find
one that is a little less expensive. Any ideas?

Larry Miller

From T.A.J.M.vdnBogaard at uvt.nl  Wed Jun 30 00:14:59 2010
From: T.A.J.M.vdnBogaard at uvt.nl (T.A.J.M. van den Bogaard)
Date: Wed, 30 Jun 2010 08:14:59 +0200
Subject: [Mini] Parts Manual
In-Reply-To: <DC018029-E70D-4960-8134-5B7D35B02BDF@ado13.com>
References: <DC018029-E70D-4960-8134-5B7D35B02BDF@ado13.com>
Message-ID: <000001cb181b$91639fc0$b42adf40$@A.J.M.vdnBogaard@uvt.nl>

Heritage CD rom, available from Minispares contains manuals and parts lists:
http://www.minispares.com/Product.aspx?ty=pb&pid=38601&title=

HTH,
Theo van den Bogaard

-----Original Message-----
From: mini-list-bounces at autox.team.net
[mailto:mini-list-bounces at autox.team.net] On Behalf Of Larry & Sandi Miller
Sent: Wednesday, June 30, 2010 7:31 AM
To: Mini-List Mini-List
Subject: [Mini] Parts Manual

I have a 1966 Cooper S and am in need of a parts manual. The only one I can
find at the moment is for sale at $90 usd on eBay. It would be nice to find
one that is a little less expensive. Any ideas?

Larry Miller
_______________________________________________
Mini-list at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/mini-list/t.a.j.m.vdnbogaard at uvt.nl

From irdesigns at vision.net.au  Wed Jun 30 00:29:00 2010
From: irdesigns at vision.net.au (Ian D. Ross)
Date: Wed, 30 Jun 2010 16:29:00 +1000
Subject: [Mini] Parts Manual
In-Reply-To: <DC018029-E70D-4960-8134-5B7D35B02BDF@ado13.com>
References: <DC018029-E70D-4960-8134-5B7D35B02BDF@ado13.com>
Message-ID: <p06110402c8508f1cf953@[10.0.1.5]>

Hello Larry,

I have an original BMC Australia February 1965 Parts Catalogue, a 
1966 BMC UK Workshop Manual, and a 1969 BMC Australia Workshop Manual 
with Australian model supplement, am and in need of a 1966 Cooper S! 
Perhaps we can go halves ;-)

Seriously, If there is specific information you are looking for that 
I can scan and email to you, let me know.  I have scanned info from 
it over the past decade or so for other Minilist members. I have 
thought about scanning the Parts Manual some day, but its about 
2.5kgs and 400 + pages so not a lightweight undertaking.

Cheers,

Ian





>I have a 1966 Cooper S and am in need of a parts manual. The only one I can
>find at the moment is for sale at $90 usd on eBay. It would be nice to find
>one that is a little less expensive. Any ideas?
>
>Larry Miller
>_______________________________________________
>Mini-list at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/mini-list/irdesigns at vision.net.au


-- 
** 1961 Morris 850 **
       _______  /z z z z z
      //__!!__\/_.z z z z      Ian Ross
     /     !` !   )           Tasmania
    =-(*)-----(*)-=          Australia
**KERMITTHEGREENMINI**