<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>A quick check on my 64B indicates my knob comes out just slightly
over 1" so that might be one thing. Also, when the knob is pushed
in, the cable above the brass lever should not have any freeplay
so you get full travel when you do pull out the cable. The
pictures indicate correct cabling but also verify the cable end is
not slipping on that carb choke bracket connection when you pull
the knob out. <br>
</p>
<p>Now off to test the thermostat replacement on my 67BGT...</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 6/22/2024 12:02 PM, dave northrup
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:006fabf3e4e14c3dbbc637c14df2f816@ranteer.com">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta content="text/html; charset=utf-8">
The brass part does not move via the cable. That is my problem.
I can manually move the brass part no problem. But the cable
does nothing when the knob is pulled out although the knob comes
out 3/4"
<div><br>
</div>
<div><br>
</div>
<div>-------- Original message --------</div>
<div>From: David Councill <a class="moz-txt-link-rfc2396E" href="mailto:dcouncill@karamursel.org"><dcouncill@karamursel.org></a> </div>
<div>Date: 6/22/24 1:53 PM (GMT-06:00) </div>
<div>To: <a class="moz-txt-link-abbreviated" href="mailto:mgs@autox.team.net">mgs@autox.team.net</a> </div>
<div>Subject: Re: [Mgs] choke not working </div>
<div><br>
</div>
<div>
<p>The important part to look at is the motion of the jets. When
you pull out the choke, that brass lever will move up and the
jets will lower. You may need to adjust the brass lever
downwards to have a longer travel for the jets to go lower.
Also, both jets should move downwards identically - if not,
you may have to adjust the brackets that connect to the carb
cam fast idle pieces.
<br>
</p>
<p>David Councill</p>
<p>67 BGT, 64B, 72B<br>
</p>
<div class="moz-cite-prefix">On 6/22/2024 10:52 AM, dave
northrup wrote:<br>
</div>
<blockquote type="cite">
<meta name="Generator"
content="Microsoft Word 15 (filtered medium)">
<style>@font-face
{font-family:"Cambria Math"}@font-face
{font-family:Calibri}p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
font-size:11.0pt;
font-family:"Calibri",sans-serif}span.EmailStyle17
{font-family:"Calibri",sans-serif;
color:black}.MsoChpDefault
{font-family:"Calibri",sans-serif}div.WordSection1
{}</style>
<div class="WordSection1">
<p class="MsoNormal"><span style="color:black">Its an early
5 main mgb engine with HS4’s in an MGA. I have the
choke cable hooked up correctly I believe. Attached are
pictures.</span></p>
<p class="MsoNormal"><span style="color:black"> </span></p>
<p class="MsoNormal"><span style="color:black">When I pull
the choke out you can see the lower part move just a
little, more like flexing. What am I missing?</span></p>
</div>
<span style="white-space:pre-wrap"></span></blockquote>
</div>
</blockquote>
</body>
</html>