<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23588">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>As you say not the flasher unit or neither side
would work.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Does the right-hand tell-tale light up on the right
side? If it does then check the bullet connector with three
green/white wires where the rear harness joins the main harness at the rear of
the engine compartment on the right side. The front circuit goes into that
and come back out again which is why that connector can affect both ends of the
car.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>If the tell-tale doesn't light either then it will be either
the switch contacts or the multi-plug as Hans says.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>PaulH.</FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV><FONT size=2></FONT><BR></DIV>
<DIV
style="FONT-FAMILY: Helvetica Neue, Helvetica, Arial, sans-serif; FONT-SIZE: 13px"
class=ydp4703184eyahoo-style-wrap>I have a 1971 MGB. The right side turn
signals do not work. Left side works fine, and the 4 Way flashers work,
as well (all 4). I have replaced the bulbs in the front and rear turn
signals on the right side, and checked to see that all of the fuses are OK,
but still no turn signals on the right side. Any
ideas?</DIV></BLOCKQUOTE></BODY></HTML>