<html><div> The pivot bolt passes through the rubber seal. Its nut and spring are underneath. While you --might-- be able to undo them from inside the door (I forget details) it would be best that you use penetrating oil generously on the nut so the bolt is not broken. </div><div> I removed the entire frame for the job, as that gave opportunity to clean and lubricate winder mechanism, adjust the channels, etc.</div><div> Ask for current recommendations for the rubber. Five or six years ago when I did it, the rubber supplied by one vendor was, at best, an approximate fit. It is cracking and splitting now, so the replacement is to be anticipated this coming winter.</div><div>Bob</div><div><br><br>---------- Original Message ----------<br>From: dave willner via Mgs <mgs@autox.team.net><br>To: <mgs@autox.team.net><br>Subject: [Mgs] triangular vent window seal replacement<br>Date: Mon, 20 Jul 2015 16:20:47 -0400<br><br></p><div dir="ltr"><div style="font-size: 12pt; font-family: 'Calibri'; color: #000000;"><div>Hi,</div><div> </div><div>Question, I replaced the horizontal seal on my vent windows many years ago and did remove the window. To replace the “triangular†rubber seal around the vent window can I just remove the old one and stuff the new one in, or do I need to remove the window again? Thanks</div><div> </div><div style="font-size: 12pt; font-family: 'Calibri'; color: #000000;">Dave Willner<br>Stroudsburg, PA<br>59 TR3A BRG<br>70 MGB BRG<br>70 BSA 441 VS</div></div></div></html>