[Mgs] Bleeders

[Max Heim]

You’re lucky — I was finding ones with a 7mm flat. Most wrench sets don’t even HAVE a 7mm, and it’s so dinky it’s guaranteed to round off the flats. So I’m interested din this, too.

--
Max Heim
'66 MGB


> On Feb 17, 2025, at 12:58 PM, David Woerpel <dtwoerpel at gmail.com> wrote:
> 
>  Hi List,
> 
> Been quiet so I thought I'd make an inquiry.  Where can one find wheel cylinder brake bleeders that are 7/16" across the flats.  All I can find take a 10mm wrench from the usual suspects.  Would like to keep the car non-metric.
> I apologize if you got this twice.
> 
> From the frozen Tundra,
> Dave W
> '59 :{)
> '59 MGA 1500
> 
> "Pay It Forward"
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20250217/5154a142/attachment.htm>