[Mgs] Wheels

[Larry Colen]

Datsun 240Z (fairlady) at least through the 280Z had the same bolt pattern as MGB and a workable offset.  I did find out one day that the center hole on some Datsun wheels is too small to fit over the bearing cap on the MGB when I took my car to the track and the wheels wouldn't bolt on straight.



> On Feb 4, 2024, at 11:56 AM, Zach Dorsch <herr_dorsch at yahoo.com> wrote:
> 
> Makers mark will influence price. I would double check the PCD to make sure they fit a B. Most of the vintage wheels that fit a B tended to be 14” and not 15”. 
> 
> 
> Sent from Yahoo Mail for iPhone
> 
> On Sunday, February 4, 2024, 12:57 PM, dave northrup <dave at ranteer.com> wrote:
> 
> A friend of mine came across these and was wondering what kind of wheels they are and what they might be worth.
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/herr_dorsch@yahoo.com
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/lrc@red4est.com

--
Larry Colen
lrc at red4est.com.   sent from Mirkwood