[Mgs] Mgb carb help needed

[dave northrup]

So the choke cable is actually anchored by the bracket, attached to the carb body, so when you pull it out the sleeve causes the bottom piece to rotate up?  seems backwards to me.

From: Zach Dorsch <herr_dorsch at yahoo.com>
Sent: Wednesday, May 17, 2023 6:50 PM
To: dave northrup <dave at ranteer.com>
Subject: Re: [Mgs] Mgb carb help needed

Hopefully this page helps! It’s the clearest that I can find.

http://www.mgb-stuff.org.uk/linkage.htm


Sent from Yahoo Mail for iPhone<https://mail.onelink.me/107872968?pid=nativeplacement&c=Global_Acquisition_YMktg_315_Internal_EmailSignature&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000604&af_sub5=EmailSignature__Static_>


On Wednesday, May 17, 2023, 7:43 PM, dave northrup <dave at ranteer.com<mailto:dave at ranteer.com>> wrote:
This is where i am.   Its an mgb engine in an mga.  Didn't come with carbs so  i ordered some off ebay.  The engine runs with gas in the float bowls; I'm trying to attach the choke and accelerator cables but im missing parts.   But i don't know what.   Could really use some help here.   And i can cut the choke sheath if need be.
_______________________________________________

Mgs at autox.team.net<mailto:Mgs at autox.team.net>
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/mgs/herr_dorsch@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20230518/c993ddf8/attachment.htm>