[Mgs] MGB engine in an MGA

[Max Heim]

This diagram may help.

The cable comes up from the bottom. The sheath is secured to lever 31 on rod 33. The cable end is secured to bracket 43, the U-shaped bracket with the protruding arm that secures the front carburetor. Pulling the choke handle rotates lever 31 upward by pulling the trunnion 36 toward the bracket.

--
Max Heim
mvheim at sonic.net






> On May 2, 2023, at 10:09 AM, dave northrup <dave at ranteer.com> wrote:
> 
> I received this car in kit form, with a weber.
>  
> Swapped out the weber for SUs, and I am almost there.  Its been pretty interesting trying to integrate the B engine into the MGA.
>  
> Can someone send me a picture or provide directions on how the choke cable is hooked in?
>  
> Thanks!
> <B70470A0.jpg>_______________________________________________
> 
> Mgs at autox.team.net <mailto:Mgs at autox.team.net>
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs <http://www.team.net/pipermail/mgs> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net <http://autox.team.net/mailman/options/mgs/mvheim@sonic.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20230502/ec37b7df/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2023-05-02 at 11.26.29 AM.png
Type: image/png
Size: 399172 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/mgs/attachments/20230502/ec37b7df/attachment.png>