[Mgs] pulling engine MGA

[Eric Russell]

> The steering rod is too stiff to get out of the way.  I would rather
remove that steering rod than
> the carbs/exhaust manifold.  Any hints on how to do that?

Don't. Remove the carbs and intake & exhaust manifolds.

If you really need to remove the steering shaft you will need to remove the
steering shaft between the steering wheel & U-joint then pull the  shaft
out of the steering rack.

-- 
Eric Russell
Mebane, NC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20221230/49e6439a/attachment.htm>