[Mgs] Mold, part 2

[Max Heim]

Theoretically it will form on the underside of the plastic… which will not be good for your carpet, which should be removed.

Leave the cover off for ventilation, as much as possible (obviously you might want to cover the car if you are running the saw or the belt sander, or spraying paint). If you could leave the windows down, at least a few inches, it would help. Surely mice can’t climb up sheer glass…


--
Max Heim
'66 MGB

> On May 6, 2021, at 2:06 PM, Frank Krajewski <frankk12 at verizon.net> wrote:
> 
> I have received many great suggestions from the list. A simple start will be to create a moisture barrier between the concrete floor, which at present has a carpet, and the MGB.  This will be in the form of a tarp or plastic sheet.  Excuse my naïveté but what prevents moisture from forming on the tarp or plastic? 
> Frank Krajewski
> 1980 MGB LE
> 1991 Mazda Miata SE
> 2003 RAV4
> 2021 Subaru Outback Limited 
> 
> Sent from my iPad
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210506/4a928bb1/attachment.htm>