[Mgs] Turn Signal Stalk

[Robinson Charley]

yes they should self cancel. There is a mechanism behind the steering wheel that engages with the turn signal switch when you turn the wheel and then when your straighten up again it pulls the switch back to the middle position. I did this on an 80 B several years ago but don’t remember all the procedures. The mechanism had been installed upside down. I found a tutorial for the process on the internet. A google search should turn up some helpful info.

> On Jan 3, 2021, at 4:34 PM, S.Carr <britfan1 at epix.net> wrote:
> 
> Yes, they should self-cancel.  At least with my ’71, it helps to drop the steering column (only a few inches, but it helps) to remove the clamshell casing around the pair of stalks—we just replaced the left-hand unit on my car, as the high beam setting didn’t work.  Installing the new unit was NOT easy….
>  
> Sarah Carr
> ’71 B/GT in PA
>  
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
> _______________________________________________
> 
> Mgs at autox.team.net <mailto:Mgs at autox.team.net>
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs <http://www.team.net/pipermail/mgs> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/charleyrob@gmail.com <http://autox.team.net/mailman/options/mgs/charleyrob@gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210103/2d130548/attachment.htm>