[Mgs] seat back adjustment

h.duinhoven at planet.nl h.duinhoven at planet.nl
Sun Jan 10 02:19:56 MST 2021


Perhaps the lever mechanics need lubrication. If the lever tooth do not come fully in gear with the fixed gear teeth, the construction will slip. Regrettably access to the inside mechanics needs to remove the vinyl backrest upholstery.

Perhaps you can try to spray some lubrication along the hole of the adjustment lever and so trying to lubricate. 

That also will lubricate the shaft of the lever itself.

 

Hope it helps.

 

Cheers,

Hans

71 BGT hybernating

 

Van: Mgs <mgs-bounces at autox.team.net> Namens S.Carr
Verzonden: zaterdag 9 januari 2021 18:00
Aan: MGs <mgs at autox.team.net>
Onderwerp: [Mgs] seat back adjustment

 

The driver’s seat back on my ’71 B/GT will not stay where it is set.  Anything more than moderate pressure will throw it backwards.  Clearly the teeth on the adjuster are badly worn.  Any advice for dealing with this?  We don’t want to strip the upholstery off until we know what might be done to fix the problem.

TIA, 

Sarah Carr

’71 B/GT in PA

 

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>  for Windows 



-- 
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20210110/e2d05eee/attachment.htm>


More information about the Mgs mailing list