[Mgs] Grill

[PaulHunt73]

Also MGBs originally had those clips fitted and removed from underneath.  The plastic sockets are of course much easier but the holes almost certainly need to be drilled out to take the thickness of the plastic as well as the pins, my body man was horrified when I did that to mine.

To no avail though as the new grille (!) did not fit  correctly as the curvature was wrong, and I had to reuse four of the original clips ... which I had saved of course.

PaulH.
  ----- Original Message ----- 

  I seem to recall those clips were originally very thin Tinnerman clips.  So if current supply is indeed thicker plastic, then yes you would need to drill out the holes for fitting.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200519/6dbddbd2/attachment.htm>