[Mgs] Mirror

[Max Heim]

I used this mirror from Moss.

https://mossmotors.com/mirror-door-left-right <https://mossmotors.com/mirror-door-left-right>

I used a spider washer on the inside so it would grip well and not loosen. You might try that as a first solution.

--
Max Heim
'66 MGB

> On Mar 25, 2020, at 5:16 PM, Thomas Gunderson <thgun at comporium.net> wrote:
> 
> I got a 9 mm to grab. I had my wife hold the mirror while I was on my back under the car. Jacked up and braced. The nut did not tighten. So I think I have to remove the mirror nut and add a washer or two so it will tighten.  I may have to replace the mirror if it won’t tighten. Do you know of a good brand or prefer another dealer other than Moss?
> 
> Sent from my iPhone X
> 
> 
>> On Mar 25, 2020, at 4:58 PM, Max Heim <mvheim at sonic.net> wrote:
>> 
>> Maybe it’s metric, since it’s a repro part.
>> 
>> 
>> --
>> Max Heim
>> '66 MGB
>> 
>>> On Mar 25, 2020, at 1:52 PM, Thomas Gunderson via Mgs <mgs at autox.team.net <mailto:mgs at autox.team.net>> wrote:
>>> 
>>> 
>>> Good afternoon,
>>> 
>>> Spending sometime working on my car. I need to tighten my fender mirror. It sits just beyond the windshield. On the left side. I think it had been replaced with a moss replacement mirror. Does anyone know the size of the nut? I have had to use a long wrench extention and not having a good time getting it to grab the nut. 
>>> Any thoughts?
>>> 
>>> Tom Gunderson 
>>> 1957  1500 mga rst
>>> 
>>> Sent from my iPhone X
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> 
>>> Mgs at autox.team.net <mailto:Mgs at autox.team.net>
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>>> 
>>> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net
>>> 
>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200325/101c9409/attachment.htm>