[Mgs] Rubber Diaphragm Fit

Dan DiBiase dan.dibiase at gmail.com
Thu Mar 5 05:20:25 MST 2020


Yes, I found it to be a 2-person job, one to hold a hair dryer on the
section you're trying to stretch while holding down one end, and the other
to work the vice-grips and pull the clip into the hole......
Someone mentioned doing front and back first as well. I don't recall, but
the diaphragms may be 'handed' as well, like the seats...

Dan D
'76B, '65B
Central NJ USA
http://dandibiase.cbintouch.com/


On Thu, Mar 5, 2020 at 7:00 AM Osborne, Paul via Mgs <mgs at autox.team.net>
wrote:

> Mike   They are tight to install. Helps if you do the front to back first.
> There is a wire edge in the rubber, or should be, so pulling hard should
> not
> pull the clip out of the diaphragm.  Clip one in first and the grab the
> clip on the opposite side with vice grips and stretch it to insert in the
> frame.
> They will go.
>
> On Mar 4, 2020, at 10:55 PM, Michael MacLean via Mgs <mgs at autox.team.net>
> wrote:
>
> Take a look at the picture.  What am I missing here?  Do I have the wrong
> seat frame or the wrong rubber diaphragm?
> Mike MacLean
> 69 MGB GT
> 56 Austin Healey BN2
> 60 Bugeye
> <20200304_195208.jpg>
>
>
>
> Sent from AT&T Yahoo Mail on Android
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__go.onelink.me_107872968-3Fpid-3DInProduct-26c-3DGlobal-5FInternal-5FYGrowth-5FAndroidEmailSig-5F-5FAndroidUsers-26af-5Fwl-3Dym-26af-5Fsub1-3DInternal-26af-5Fsub2-3DGlobal-5FYGrowth-26af-5Fsub3-3DEmailSignature&d=DwMFaQ&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=g3PvqKT4OTCD_iLdKezOqTcd5PsN8b90dNKg-TwuQDM&s=ago9kOAFzyBq2iVP___5RgGVKI8oxwd70uBkYse6MRU&e=>
> <20200304_195208.jpg>_______________________________________________
>
> Mgs at autox.team.net
> Donate:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_donate.html&d=DwICAg&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=g3PvqKT4OTCD_iLdKezOqTcd5PsN8b90dNKg-TwuQDM&s=4HMur66K0HQ2bZ3qlkEOF8GaFXkRYqVc2G8_Vg8T4R8&e=
> Suggested annual donation  $12.75
>
> Archive:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_pipermail_mgs&d=DwICAg&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=g3PvqKT4OTCD_iLdKezOqTcd5PsN8b90dNKg-TwuQDM&s=hjf0cWRExWm6m1QRIE5C4AyRLF0ZTpUlp1-QLEXUTE4&e=
>
> https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_archive&d=DwICAg&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=g3PvqKT4OTCD_iLdKezOqTcd5PsN8b90dNKg-TwuQDM&s=N9AILYiqPdlijOTyUkA9JU5q2Qr_nObbm4sTfGekMPo&e=
>
> Unsubscribe:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_options_mgs_paul-40ece.rochester.edu&d=DwICAg&c=kbmfwr1Yojg42sGEpaQh5ofMHBeTl9EI2eaqQZhHbOU&r=j_uK0-rtrtcKZ8O0aGq-Y5ZUDfHjCD_Cv57WMn_czag&m=g3PvqKT4OTCD_iLdKezOqTcd5PsN8b90dNKg-TwuQDM&s=NP5EnCgvaYvbR4faMIqVh-sdDIUO74rcVZh4jTemZ6k&e=
>
>
> Paul Osborne
> Paul's Canvas
> 7379 E Main St
> Lima NY 14485
> 585-255-0531
>
>
>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200305/d9d0e9c0/attachment.htm>


More information about the Mgs mailing list