[Mgs] Trip Meter Reset Cable Assy

[Andrew Lundgren]

I've got the same issue. This seems like a good problem to solve with 3d
printing.

I lost the parts from mine years ago. If you still have the parts, then you
can probably get it reproduced.

Andrew

On Sat, Jan 18, 2020, 12:07 AM Michael MacLean via Mgs <mgs at autox.team.net>
wrote:

> Anyone know where to get a trip Meter reset cable assembly for a 1969 MGB
> GT.  Today I pulled the speedo out for rebuild because the odometer does
> not work.  I found out why the trip Meter would not reset.  The cable
> assembly fell out of the back of the speedo case.  The part that locks into
> the case is broken so it will not stay put.  I don't see this part in any
> of the catalogs.
> Mike MacLean
>
> Sent from AT&T Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/lundgren@byu.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200118/6de840ea/attachment.htm>