[Mgs] rivets without holes

[Robert's New iPad]

   A bit of Permatex on the rivet’s shank before peening, perhaps?  
Bob


> On Aug 4, 2020, at 6:32 PM, David F. Darby <ddarby at centurytel.net> wrote:
> 
> I did the same thing and mine weeps also,
>  
> David
>  
> From: Mgs [mailto:mgs-bounces at autox.team.net] On Behalf Of dwoerpel
> Sent: Tuesday, August 4, 2020 3:40 PM
> To: Eric Russell; mgs at autox.team.net; dave at ranteer.com
> Subject: Re: [Mgs] rivets without holes
>  
> I did similar but the buck was an alloy. Worked well on the tubular rivet but I get oil leaking out the rivet holes.  Re-did them using sealer but still leak.
> Any ideas before Dave rivers his and this Dave tries again?
>  
> Thanks,
>  
> Dave W
>  
> '59 :()
> '59 MGA 1500
>  
> Burlington WI 
> "Pay It Forward"
>  
>  
>  
> Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone
>  
>  
> -------- Original message --------
> From: Eric Russell <ejrussell at mebtel.net>
> Date: 8/4/20 1:32 PM (GMT-06:00)
> To: mgs at autox.team.net, dave at ranteer.com
> Subject: Re: [Mgs] rivets without holes
>  
> I bought a package from McMaster-Carr a few years ago. I have lots left.
> 
> Send me your mailing address & I will put a few in envelope.
> 
> To set the rivets I made a buck with a length of hardwood. Drill a small 
> divot in the end, clamp the piece of wood in a vise, position the rivet 
> head in the divot - through the ID plate & valve cover and peen over the 
> end of the rivet. I started it by using a center punch in the end of the 
> rivet then peened it over with a ball peen hammer.
> 
> Eric Russell
> Mebane, NC
> 
> On 8/4/2020 2:00 PM, mgs-request at autox.team.net wrote:
> > Date: Tue, 4 Aug 2020 10:34:17 -0500
> > From: "dave" <dave at ranteer.com>
> > To: <mgs at autox.team.net>
> > Subject: [Mgs] rivets without holes
> > Message-ID: <003401d66a74$b83cc7f0$28b657d0$@ranteer.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > ISTR there was a thread a while back about rivets without holes in them
> > (i.e. solid tops).  I need to rivet in the metal plates on the valve cover
> > and I would like to do it correctly.
> >
> >   
> >
> > Can someone help me out?
> 
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/dwoerpel@wi.net
> _______________________________________________
> 
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20200804/db018406/attachment.htm>