[Mgs] [MG-MGB] Rough Running

Dan DiBiase d_dibiase at yahoo.com
Tue Sep 6 15:32:56 MDT 2016


Just to be clear - it appears that the line from the brake booster goes into a port on the intake manifold, not the carb - 

http://i24.photobucket.com/albums/c30/ddibiase/1976%20MGB%20Engine%20Work/DSCF0007.jpg
It's the hose with the cross-hatch design on it.
Thx, Dan


      From: PaulHunt73 via Mgs <mgs at autox.team.net>
 To: MG-MGB at yahoogroups.com 
Cc: MG List <mgs at autox.team.net>
 Sent: Tuesday, September 6, 2016 8:17 AM
 Subject: Re: [Mgs] [MG-MGB] Rough Running
   
 Yes.  It would only be wet if it is sucking brake fluid past a faulty seal in the servo. PaulH. 
 ----- Original Message -----  Ok, thanks, guys, will check this tonight. I assume that this is simply providing vacuum to the booster and should be dry normally...?     


_______________________________________________

Mgs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/mgs/d_dibiase@yahoo.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20160906/c249d7d8/attachment.html>


More information about the Mgs mailing list