[Mgs] MGA Tach cable

[Barney Gaylord]

If penetrating oil and grips doesn't do it, remove the two hex nuts 
and pull the entire assembly out of the block, and take it to the 
work bench for disassembly.


At 09:34 PM 3/24/2016 -0500, Robert J. Guinness via Mgs wrote:
>Is there a trick, technique, or tool that is needed to remove the 
>tach cable from the block.  I tried to unscrew it by hand from the 
>top and it won't budge.  I tried vise-grips (vertical) from above, 
>and even long node bent pliers.  It won't budge.   There is very 
>little room to maneuver to attack it horizontally.
>....