[Mgs] Installing antenna

[Barney Gaylord]

Rule #1:  If it is an aftermarket part, do not count on it being standard.

Rule #2: When you have a question about the aftermarket part, ask the vendor.

Rule #3:  If the vendor will not answer your tech question, or the 
part comes without installation instructions, send it back for a 
refund (as it is unusable).

Rule #4:  If you have a question about MGA check the web site: 
http://MGAguru.com

Now if you were installing a vintage original Radiomobile antenna, 
you may find the installation instructions here: 
http://mgaguru.com/mgtech/accessories/at112b.htm
     (and the hole for the antenna is 7/8-inch dimeter).

Banrey Gaylord
1058 MGA with an attitude
http://MGAguru.com


At 09:17 PM 6/2/2016 -0400, James Schulte via Mgs wrote:
>....
>I am trying to install a Moss retractable antenna in my 74.5 BGT. I 
>need to know how big a hole I should drill in the left (driver side) fender.
>....