[Mgs] carb leaks that shouldn't be happening

[Barney Gaylord]

I recommend using Teflon O-rings in place of the original cork seals, 
no drip, no leak, no stick even after long storage, good for 
decades.  Find lots of SU carburetor service information for MGs 
here: http://mgaguru.com/mgtech/carbs/carb.htm


At 09:22 PM 8/20/2016 -0700, Clayton Kirkwood via Mgs wrote:
>....
>My 62mga is having drinking problems. I put new fiber seals on I my 
>carbs and they are leaking. I dare not tighten any further as they 
>are obviously brass vs aluminum. Any suggestions? Should I soak the 
>fibers in oil?
>....