[Mgs] '65B Restoration Status, How to Proceed
pryner at verizon.net
Thu Feb 19 15:57:31 MST 2015
I wouldn’t be concerned with a bondo job from a reputable shop, but if you need rockers and other major parts replaced, not just repaired I’d only take it to an experienced MG shop. You have a great looking survivor that is worthy of a good restoration. Wish mine was that clean.
Of course it isn’t my money and a good shop will cost thousands, typically more than what a completed MG is worth. You didn’t mention where you live. Is there a club in the area that may be able to help?
Good luck with the project
From: dave n via Mgs
Sent: Thursday, February 19, 2015 11:04 AM
To: MG List ; MGB Group
Subject: Re: [Mgs] '65B Restoration Status, How to Proceed
do not take it to a shop that has not worked on old british cars. they don’t have a clue and won’t do it right. your car will be bondo’d and a mess. it is well worth taking to someone who has experience.
From: Dan DiBiase via Mgs
Sent: Thursday, February 19, 2015 8:52 AM
To: MG List ; MGB Group
Subject: [Mgs] '65B Restoration Status, How to Proceed
I apologize for the length of this note.....
My '65 B has been stuck in limbo for a few years now, as circumstances have made it difficult for me to free up any time to work on this project. But I expect to have some
time this coming year to re-start.... Here is the background -
I purchased this car in 1999 with the intention of restoring it to (mostly) stock condition, not to be a concours car but an enjoyable driver. 'Mostly stock' meant, in my mind,
that it wouldn't necessarily be as it came from the factory - I want to put an O/D in it as well as upgraded tires, etc. The condition of the car was pretty darn good for a $600,
non-running example. There is one rust hole in the passenger's side rocker, so I assume that there is additional inside and on the other, although frankly they are in better
shape than the ones on my '76 B! Also some rust in the rear fender. But overall, the body is in good shape. Mechanically, the parts are all there but the engine accessories
were all removed when I bought the car and the engine itself is seized. It is probably the incorrect engine for the car, being a G-series 3 main bearing car - it should be a GB
5 main bearing engine based on the build date. I have a couple of GB blocks that are rebuildable. I may also just take the '75B engine out of my '76B and use that, as I expect
the '76B - being pretty rusty - to only have a few years of life left in the body....
Current status is 'mostly' stripped. Wiring loom, engine/trans, steering column all remain in the car. Everything else has been removed and stored away.
I'm at the point where I need to make a decision about proceeding. I am assuming that my next step would be to remove the engine/trans and wiring, and I can proceed to have
the body looked at...? I don't really have the skills/tools to do the welding work necessary to replace the rockers, nor am I really that interested in learning... ;-) The nearest MG
'specialists' are over an hour away but there are several reputable body shops in my area (at which I have had work done on my 'regular' cars). I'm wondering about thoughts on
using a regular shop. And also what sort of things I can do in terms of prep to reduce the cost of this work.
Other comments appreciated.
Oh, and lots of pictures are here => http://s24.photobucket.com/user/ddibiase/library/1965%20MGB?sort=3&page=1
Mgs at autox.team.net
Suggested annual donation $12.75
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Mgs