[Mgs] Oil bummer

[Charley & Peggy Robinson]

That's the hose I used when I built the engine in my B over 5 yrs ago. 
So far, so good.

CR

EDIT:  Checked my records;  I built that engine in 1999, so that Teflon 
lined hose has been on there ~14 yrs. Lord, where did all those years go?


On 5/5/2013 1:22 PM, Barney Gaylord wrote:
> In 1986 I installed a Teflon lined oil pressure hose form Moss Motors,
> life-time guarantee.  It is still hanging in there 27 years and 1/4
> million miles later (same as the two fuel hoses at the carburetors).
> Teflon is good stuff in contact with petrochemicals.  It predates but
> survives our switch to 10% ethanol fuel.
>
> Barney Gaylord
> 1958 MGA with an attitude
> http://MGAguru.cmo