[Mgs] Mgs Digest, Vol 72, Issue 2

[Duvall Video Productions]

You lucky if all comes up after 5 minutes....




On May 2, 2013, at 1:00 PM, mgs-request at autox.team.net wrote:

> Yes, after about 5 minutes, I scrape the part with a putty knife, wiping
the
> goo onto a paper towel.  I then usually wipe the piece with a town
moistened
> in lacquer thinner, leaving anything on the surface of the metal to
> evaporate.  I then sand the part with sandpaper and or the wire wheel in a
> drill.  I then spray the part with Restomotive's Metal Ready.  Once dry,
the
> part can then be primered (I use an etch or rust neutralizing primer),
> followed by body filler to even out any rust dimples and to smooth the
> surface.