[Mgs] Mgs Digest, Vol 73, Issue 18

[Allen Hess]

Smart -- just like a windshield.

Allen
On Jun 28, 2013, at 2:00 PM, mgs-request at autox.team.net wrote:

> You can't put the grommet in the panel first, because the nut on end  
> of oil cooler hose is larger and won't go through the grommet when  
> in the panel.  But it is easy when you know how.  Put the grommet on  
> the hose first (stretching the grommet to go over the nut).  Then  
> pass the nut and hose through the panel, bringing the grommet up to  
> the hole.  Wrap a string around the grommet in the groove 1-1/2  
> turns.  Pass the string through the panel hole.  Push grommet up  
> against the panel, and pull on the string.  As the string pulls  
> through it will pull the lip of the grommet through the hole, and  
> irt's done in a flash.
>
> Barney Gaylord