[Mgs] loctite question

PaulHunt73 paulhunt73 at virginmedia.com
Mon Jan 7 09:48:16 MST 2013


Fairy nuff.  It does depend just how much thickness is going to be needed to 
bring the holes into line, it could need a washer.

----- Original Message ----- 
> In that application the nut is not bearing directly on the shims.  A nut 
> bearing directly on a thin shim will destroy the shim as the nut is 
> tightened.  If you are going to shim a nut for rotation reference, you 
> need a hard flat washer between nut and shim, and the washer should be 
> keyed so it doesn't rotate.


More information about the Mgs mailing list