[Mgs] Didn't get a lot done today BUT...

[dwoerpel]

Actually here's where I bought the sockets:

http://mogparts.net/index.php/electrical/other-electrical.html

Part# ELM031

Melvyn Rutter Ltd.  Morgan dealer extraordinaire.   You can request an 
image.  Very nice people to work with.  I rang him up to ask some other 
tech questions.

DW


On 4/4/2013 9:08 AM, dwoerpel at wi.net wrote:
> Try Holden's.
>
> http://www.holden.co.uk/displayproduct.asp?sg=1&pgCode=082&sgName=Electrical&pgName=Wiring&agCode=0490&agName=Plugs+%26+Sockets&pCode=080.041
>
> OR     http://tinyurl.com/cud8sxs
>
> Also:  www.morgan-spares.com
>
> I used the latter but they probably all get their stock from the same source.
> Check which type of sockets you have; couple of different types.
>
> Dave W.
>
>
> Where are the power sockets available? I'm working on an early Land-Rover
>> and need a set of those.
>>
>> --
>> Stephen West-Fisher
>> N4IK
>>
>>
>> -----Original Message-----
>>
>>
>> I next cleaned and evaluated the power sockets from the instrument panel.
>> The metal bits are fine but the black and red insulators are shot (falling
>> apart) - and they're expensive.  I also don't expect to reconnect them so
>> I
>> went for an alternative; two grommets in the holes with the metal bits
>> re-installed.  One of the grommets is now red.
>> Later, if I (or someone) wants to reconnect these sockets, the parts are
>> available.  Picture of the grommet follows, and in a later picture with
>> the
>> other bits.
>>
>> http://www.aubard.us/MGTD/HPIM1074.JPG