[Mgs] Restraining rod nuts

[Paul Hunt]

No, it should be a stiff-nut.

----- Original Message ----- 
> While checking under my car I discovered that the nuts on the restraining
> rod (the piece which keeps the engine and transmission from sliding 
> forward
> when you stop) were loose.  I suspect that I forgot to tighten them the 
> last
> time I loosened the rear mounts to replace the overdrive isolation switch,
> but I am wondering if they should be in pairs so that they could be
> tightened against each other and would, thus be less likely to come loose.