[Mgs] Adjusting valves- cold or hot

[Chris Moog]

About 0.002 of an inch.

On 11/13/2011 10:05 PM, Peter Schauss wrote:
> The specification page on my Haynes manual gives two numbers for the valve
> clearance: 0.015" cold and 0.013" hot.  On my '80 B, I have been setting the
> valves hot for the past 20 years/70k miles.  How much difference would it
> actually make if I set the cold?
>
> Peter Schauss
> 1980 MGB
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/cgmoog@optonline.net