[Mgs] Lever arm shock question

[dannyvarnado]

Dan,
It's a very tight spine fit.  It can be pressed off with a home press but 
you have to fit various pieces of plate around the arm.  I also had to use C 
clamps.  It took some "trial and error" to set up but I was able to press it 
apart.
Danny V.
'58 MGA
'68 MGB
'76 MGB 3.4 V6
('70 Triumph TR6)

----- Original Message ----- 
From: "Dan Dwelley" <maine2me at yahoo.com>
To: "MG List" <mgs at autox.team.net>
Sent: Sunday, November 06, 2011 4:13 AM
Subject: [Mgs] Lever arm shock question


> Is one side of the MGB lever arm shock a press fit or spline fit? looks 
> like a spline but I'm thinking it may be a press fit.
>
>
> Thanks!
> Dan
> 56 MGA
> 68 MGB
> 69MGB GT
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/mgs/dannyvarnado@cox.net