[Mgs] early master cylinder cap

[Max Heim]

Not sure that this is very critical, considering there is a breather hole in
the cap itself. I suppose the purpose of it is to prevent the cap from
rusting on permanently. It certainly doesn't "seal" anything.

--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires

on 6/22/11 9:13 AM, Woerpel at dwoerpel at wi.net wrote:

> Anyone out there know of a source for the "paper" gasket that seals the
> original metal cap on the M/C of a Bugeye or MGA 1500.  I have 3 caps
> and only 2 gaskets both of which are quite compressed.
> Might have to make my own, right?
> 
> TIA,
> Dave W.
> 59 :{)
> 59 MGA 1500