[Mgs] brake pads

[Dan DiBiase]

Hmm, if that were the case for the regular pads, I guess mine (basic OEM-style 
pads) would have been handed as well but I don't recall that
being the case and mine fit just fine - unless I got lucky and just happened to 
put the pouters and inners in the correct spots....

 Dan D
Central NJ USA
'76 MGB Tourer
'65 MGB Tourer (Project)
NAMGBR #5-2328 
http://dans65b.blogspot.com/
http://dans76b.blogspot.com/
http://dansautoblog.blogspot.com/
http://dans-life-blog.blogspot.com/
twitter: dandibiase





________________________________
From: Paul Hunt <paul.hunt1 at blueyonder.co.uk>
To: Paul Root <ptrmgb at gmail.com>; MG List <mgs at autox.team.net>
Sent: Fri, June 10, 2011 4:03:30 AM
Subject: Re: [Mgs] brake pads

Sounds like the V8 pads or callipers.  They have 'handed' pads in that the inner 
is different to the outer on each calliper, and of course there was the time I 
bought a set to find three inners and one outer ...

----- Original Message ----- 
> It seems the Classic Gold pads I bought don't fit. I forced them in enough to
> get the cotter pin in and figured it would seat itself correctly, but no, it
> didn't, the inside pads got stuck, and wouldn't move in the caliper. Measuring
> they are a good .02-.03 inches wider than the stock pads I pulled out.