[Mgs] What size wrench for brake/clutch lines?

[Mike Eldred]

Most of the ones I've come across have been 7/16", but as Barney says, there
are no guarantees that yours are the same size.


> Date: Fri, 15 Jul 2011 09:48:39 -0500
> To: bobmgtd at comcast.net; mgs at autox.team.net
> From: barneymg at mgaguru.com
> Subject: Re: [Mgs] What size wrench for brake/clutch lines?
>
> I'm not a MGB guy, so I don't know. However, if you are buying
> replacement parts, don't bet on it being original. These days lots
> of replacement hoses are being made with metric hex sizes..
>
>
> At 09:59 AM 7/15/2011 -0400, Bob Donahue wrote:
> >I'd like to get a flare nut wrench for the hydraulic lines on my '71
> >MGB. What size are the fittings?
> >....
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/mgs/redscirocco@hotmail.com