[Mgs] heater motor wiring

[Chad]

The Black wire can go to the housing but it probably isn't necessary. The
heater box will ground itself when it is attached to the car and should be
fine the new power wire connection is more important.



-----Original Message-----
From: mgs-bounces at autox.team.net [mailto:mgs-bounces at autox.team.net] On
Behalf Of spetrosky
Sent: Tuesday, January 04, 2011 7:07 PM
To: MG List List
Subject: [Mgs] heater motor wiring

I purchased a new heater motor for my mga 1500 (moss # 363-040) and  
need help connecting to the wiring harness.

The harness has two wires, one green one black but the motor only has  
one new style connection, maybe a 1/4" spade type. how should this be  
hooked up.  Is the spade connector for the green wire? and I can  
attach the black wire to the housing for a ground?

any insight would be appreciated.



Steve Petrosky
paintrix / driver's road
***New Contact Information***
8711 Reading Road, E1
Cincinnati, Ohio 45215
spetrosky at cinci.rr.com
www.driversroad.com
513.490.5621
_______________________________________________